What are the maintenance and care requirements for mining equipment, and what should be noted?
Release time:
2024-11-14
The bearing bears the entire load of the machine, so good lubrication has a significant impact on the bearing's lifespan. It directly affects the machine's service life and operating rate, thus requiring that the injected lubricating oil must be clean and the seal must be good. This is the main lubrication point of the machine.
1. The shaft bearing bears the entire load of the machine, so good lubrication has a significant relationship with the bearing's lifespan. It directly affects the machine's service life and operating rate, thus requiring that the injected lubricating oil must be clean and the seals must be good. The main lubrication points of this machine are: 1. Rotating bearings; 2. Roller bearings; 3. All gears; 4. Moving bearings and sliding surfaces.
2. Newly installed wheel rims are prone to loosening and must be checked regularly.
3. Pay attention to whether each part of the machine is functioning normally.
4. Check the wear degree of easily worn parts and pay attention to replacing worn-out components at any time.
5. The base plane of the moving device should be cleared of dust and other materials to prevent serious accidents when the machine encounters uncrushable materials, which may cause the moving bearings not to move on the base.
6. If the bearing oil temperature rises, stop immediately to check for causes and eliminate them.
7. If there is a knocking sound from rotating gears during operation, stop immediately to check and eliminate it.
Dawei Mining Machinery
Dongxinzhuang village, Dongxinzhuang Town, Zunhua City
Follow us
Copyright © Zunhua Dawei Mining Machinery Co., Ltd
